Table of Contents
Advertisement
Maximum Temperature Setting
It may be necessary to adjust the maximum temperature for site
conditions to ensure safe showering from the unit. Ensure hot water
temperature is at least 10°C above the required temperature from the
unit.
To reset the maximum outlet temperature the sequence below
should be followed:-
1.
Turn outer flow control
anticlockwise to full on.
2.
Turn the inner temperature
control lever anticlockwise
until maximum rotation has
been achieved.
3.
Check temperature.
4.
If temperature requires
adjustment, with the unit
running, pull the inner
temperature control from the
unit.
5.
Insert a thin bladed
screwdriver down the centre
of the temperature spindle,
turn anticlockwise to
increase or clockwise to
decrease temperature.
6.
Refit inner temperature
control and turn off.
18
Advertisement
Table of Contents
