Table of Contents
Advertisement
Cleaning
Many household cleaners contain abrasive and chemical substances,
and should not be used for cleaning plated or plastic fittings. These
finishes should be cleaned using a mild washing up detergent or soap
solution, rinsed and then wiped dry with a soft cloth.
Cleaning Inlet filters
Warning! Isolate the electrical
and water supplies before
proceeding.
1.
Remove unit controls and
front cover (see
INSTALLATION).
2.
Remove retaining screw and
filter cap.
3.
Remove filters and clean.
4.
Grease 'O' seals and fit to
filter cap.
5.
Refit in reverse order.
6.
Restore the water supplies
and check for leaks.
7.
Refit cover, retaining screw
and controls.
8.
The unit will have to be
commissioned again (see
COMMISSIONING).
9.
Restore electrical supplies.
MAINTENANCE
22
Advertisement
Table of Contents
