Additional Information And Tips - Magic Chef MCSDW7FCB User Manual

FAULT CODES
TROUBLE
POSSIBLE FAULT
CODE
Water inlet system failure
FF
Pressure system failure
F5
F3 Continuous water input
Inability to discharge water
F2
Heater error
F8
Overflow
F1
Faulty electronic card
FE
Overheating
F7
Divisor position error
F9
Faulty heater sensor
F6
High voltage failure
HI

ADDITIONAL INFORMATION AND TIPS

1. When the unit isn't in operation:
• Disconnect the plug and close the tap.
• Leave the door slightly open to prevent odor formation.
2. Select the dry option to remove standing water droplets.
3. Place dishes in the machine properly to get best results in cleaning and efficiency.
4. Rinse dirty dishes before placing them in the dishwasher.
5. Only use the Rinse program when necessary.
6. DO NOT install the unit near a refrigerator or freezer as it will reach high temperatures.
7. If the dishwasher is located in an area that is at risk of freezing, close the tap, disconnect the inlet
hose from the tap and drain the water inside the hose and the unit completely.
WHAT TO DO
Make sure the water inlet tap is open and water is flowing.
Separate the inlet hose from the tap and clean the filter of
the hose.
Contact for service if the error continues.
Contact for service.
Close the tap and contact for service.
Water discharge hose and filters may be clogged.
Cancel the program.
If the error continues, contact for service.
Contact for service.
Unplug the machine and close the tap.
Contact for service.
Contact for service.
Contact for service.
Contact for service.
Contact for service.
Contact for service.
23