Advertisement
8. Remove the front bezal
1. Using a Phillips screwdriver #2, remove the screws attaching the logo cover bottom 8pcs
9.
Remove the base
1. Using a Phillips screwdriver #2, remove the screws attaching the base 6pcs
10. Remove the PHY board
1. Using a Phillips screwdriver #2, remove the screws attaching the PHY board 4pcs
11. Remove the riser bracket
1. Using a Hexagon screwdriver and Phillips screwdriver #2 remove the screws attaching the riser bracket
12. Remove the Asic board
1. Using a Phillips screwdriver #2, remove the screws attaching the Asic board 4pcs
13. 12-Finish
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
MF877-00
Template Revision C, 30-July-2018
Copyright 2018 Hewlett Packard Enterprise Development LP
HPE instructions for this template are available at
MF877-01
Page 3
Advertisement
