Advertisement
Item Description
Components, parts and materials containing
refractory ceramic fibers
Components, parts and materials containing
radioactive substances
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Phillips screwdriver #2
Torx style screwdriver
Flathead screwdriver
Hexagon screwdriver
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. Remove the Plastic Protectors cover, and terminal conn.
1. Using a Phillips screwdriver #2, remove the screws attaching the terminal.
2.
Remove the top ground lug.
1. Using a Phillips screwdriver #2, remove the screws attaching the ground lug 2pcs
3.
Remove the din kit
1. Using a Phillips screwdriver #2, remove the screws attaching the din kit 4pcs
4.
Remove the back logo cover bottom
1. Using a torx style screwdriver T10, remove the screws attaching the logo cover bottom 6pcs
5.
Remove the riser bracket
1. Using a Phillips screwdriver #2 remove the screws attaching the riser bracket
6.
Remove the logo cover assembly
flathead screwdriver
1. Using a
7. 7. Remove the side logo cover bottom
1. Using a torx style screwdriver T10, remove the screws attaching the logo cover bottom 6pcs
MF877-00
Template Revision C, 30-July-2018
r, remove the logo cover
Copyright 2018 Hewlett Packard Enterprise Development LP
HPE instructions for this template are available at
Notes
Tool Size (if
applicable)
M3
T10
1.0
M3
MF877-01
Quantity
of items
included
in product
0
0
Page 2
Advertisement
