Advertisement
3. System Connec�on Procedures
Step 1. Connect an HDMI source (such as a Blu-ray player) to the HDMI IN port of
the transmi�er with an HDMI cable.
Step 2. Connect the TP OUT port of the transmi�er to TP IN port of the receiver via
a shielded CAT5e/CAT6 cable.
Step 3. Connect an HDMI display (such as an HDTV) to the HDMI OUT port of the
receiver with an HDMI cable.
Step 4. When using the bi-direc�onal IR control, do the following.
a) Connect the included IR receiver to the IR IN port at either the
transmi�er or the receiver.
b) Connect the included IR Emi�er to the IR OUT port at the other end.
Step 5. Connect the included DC 24V power adaptor to the power port of the
Transmi�er or the receiver.
TL-TP70-HD2ARC User Manual
www.tlnetworx.com
Advertisement
