Disclaimer and Note Dear Customers: Thank you for purchasing this product. In order to operate the drone conveniently and safely, please read all instructions and warnings carefully before operating. Please also keep the instruction manual for future reference and maintenance. 1.
Page 4
14. Charger is not a toy. 15. When charging the battery, please conduct it under the surveillance of an adult. Please also keep it far away from any combustible object when charging. Please keep this aircraft within eyesight when charging. 16.
Replace the blades 1. Replace with a new blade at the corresponding position. Blade A should be installed on position A, while blade B should be installed on position B. If the blades are installed on the wrong position, the drone will be unable to be operated or controlled.
Push the phone holder upwards as shown in the figure, insert one side of the phone into the bottom slot of the phone holder, and then pull the phone holder lever upwards until the phone is inserted. After taking out the mobile phone, the stretching part of the mobile phone clip will automatically retract the mobile phone clip, and then put the mobile phone clip into the remote controller.
Operation Method Ascend Ascend / Descend / Use “left control stick” to control the altitude & rotation during flight. Left / Right Turn Decend Forward Use “right control stick” to control Forward / Backward Left Right forward / backward / left / right / Left / Right during flight.
About Aircraft Flight Modes Dreamer Mini adopts a new generation of flight control, which supports the following two flight modes. GPS mode GPS module can realize precise hovering, pointing flight and other intelligent flight modes. In the GPS mode, when the GPS signal is strong, GPS can be used for precise positioning;...
Page 9
2.2 Wifi connection (Android) Enter the mobile phone WLAN settings, click to connect to the aircraft WIFI: Potensic_DSDR05x_xxxxxx, select in the mobile hotspot Internet network data detection prompt: Keep WLAN Connection. 3. Open the PotensicFly APP, register and log in to enter the APP main page. 4.
Page 10
5. If you need other help, please go to APP-Personal Center-Feedback and contact us. 1. Operation Interface 1. Home 2. Drone status 3. Transmission signal level 4. Drone power 5. Setting 6. Photo / Video switch 7. Photo Taking / Video Recording 8.
There are two remote control modes of this product, mode 1 and mode 2. Mode 1 is the default setting. Malfunction Sloving Guideline Malfunction Cause Treatment 1. The drone enters low voltage 1. Charge the drone protection mode 2. The remote controller’s battery 2.
Need help?
Do you have a question about the Dreamer Mini and is the answer not in the manual?
Questions and answers