1. Manuals
  2. Brands
  3. DirekTronik Manuals
  4. Matrix Switcher
  5. 20112738
  6. Operation manual

DirekTronik 20112738 Operation Manual

4k60hz hdmi 4x4 seamless matrix video wall / multi-viewer
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Best.nr: 20112738
4K60Hz HDMI 4X4 Seamless Matrix
Video Wall / Multi-Viewer
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 20112738 and is the answer not in the manual?

Questions and answers

Related Manuals for DirekTronik 20112738

Summary of Contents for DirekTronik 20112738

  • Page 1 Best.nr: 20112738 4K60Hz HDMI 4X4 Seamless Matrix Video Wall / Multi-Viewer...
  • Page 2 Operating Instruction Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. SURGE PROTECTION DEVICE RECOMMENDED This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lightning strikes, etc.

  • Page 3: Table Of Contents

    Operating Instruction Catalogue 1. Features ..............................5 2. Package Contents ............................ 5 3. Specifications ............................6 4. Panel Descriptions ..........................6 4.1 Front Panel ............................ 6 4.2 Rear Panel ............................. 7 5. Wiring Diagram ............................7 5.1 Seamless Matrix Mode ......................... 7 5.2 Video Wall Mode ..........................
  • Page 4 14. Firmware Updating ..........................53 14.1 MCU application layer upgrade ....................53 14.2 GUI Web Page Upgrade ......................54 15. Maintenance ............................55 16. Product Service ........................... 55 17. Warranty ..............................55...

  • Page 5: Features

    Operating Instruction 1. Features  4x HDMI Inputs which can be independently routed to HDMI Outputs. No switching delay or picture loss during transitions  Supports resolution up to 4K@60HZ 4:4:4  Supports Video Wall up to 7 different modes with each monitor with 4K@60Hz 4:4:4 resolution.

  • Page 6: Specifications

    Operating Instruction 3. Specifications Operating Temperature Range -5 to +40°C(23 to +104 °F) Storage Temperature Range -10 to +60°C(-14 to +140 °F) Operating Humidity Range 5 to 90 % RH (no condensation) Input Video Signal 0.5-1.0 volts p-p Input DDC Signal 5 volts p-p (TTL) Bandwidth 18Gbit/s...

  • Page 7: Rear Panel

    Operating Instruction Rear Panel ① Audio In ② Audio Out ③ S/PDIF OUT ④ IR Ext ⑤ RS232 port ⑥ HDMI IN x4 ⑦ HDMI OUT x4 ⑧ Ethernet port ⑨ Power input 12V/3A 5. Wiring Diagram Seamless Matrix Mode...

  • Page 8: Video Wall Mode

    Operating Instruction Video Wall Mode 5.3 Multi-Viewer mode...

  • Page 9: Panel Control

    Operating Instruction 6. Input / Output Channel Key Operation Channel Button Method 1. Directly press the number key, such as input channel 1, and select "1" to press (only OUT1-4 when the output port is selected, the input channel number will be valid) 2.

  • Page 10: Main Menu

    Operating Instruction Operation: press “2”, “1” and “3” in Output area + “2” in IN source area to complete the switch 3. Switch all output to input 4 source press “ Operation: 4” in Output area + “4” in IN area to complete the switch Main Menu Main menu is divided into 5 module, which are Output, Input, Preset, Config, Info.
  • Page 11 Operating Instruction 1）Source Any output can be switched to one input, or all outputs can be switched to the same input; The default 4x4 matrix is 4-way input and 4-way output one to one output. Operation: ① Select “Output” in the main menu and press “ENTER” ②...
  • Page 12 Operating Instruction ⑦ Select “On” or “Off”, press “ENTER” to complete the operation. The blue screen will be displayed after turning off the output. 3）Pattern Built-in image of a matrix can be showed onto the TV by Pattern, which is mainly used for testing in special occasions.
  • Page 13 Operating Instruction Operation: ① Select “Output” in the main menu and press “ENTER” ② Press “UP” or “DOWN” to select “ Output 1~4, all” ③ Click “ENTER” to enter the next sub-menu ④ Press “UP” or “DOWN” to select “Video” ⑤...
  • Page 14 Operating Instruction Operation: ① Select “Output” in the main menu and press “ENTER” ② Press “UP” or “DOWN” to select “ Output 1~4, all” ③ Click “ENTER” to enter the next sub-menu ④ Press “UP” or “DOWN” to select “Video” ⑤...
  • Page 15 Operating Instruction Operation: ① Select “Output” in the main menu and press “ENTER” ② Press “UP” or “DOWN” to select “ Output 1~4, all” ③ Click “ENTER” to enter the next sub-menu ④ Press “UP” or “DOWN” to select “Video” ⑤...
  • Page 16 Operating Instruction Operation: ① Select “Output” in the main menu and press “ENTER” ② Press “UP” or “DOWN” to select “ Output 1~4, all” ③ Click “ENTER” to enter the next sub-menu ④ Press “UP” or “DOWN” to select “Video” ⑤...
  • Page 17 Operating Instruction Remarks: A layer can select only one output, cannot select it repeatedly, otherwise it does not take effect. 10）Wall Wall is used to set the coordinate position of the TV. By default, it is in accordance with the matrix silkscreen making sequence.

  • Page 18: Audio

    Operating Instruction 11) Image Image is used to set the parameters of output image. There are 4 parameters: Brightness, Contrast, Staturation, Hue, Parameter Ranges from 0 to100 and it is 50 by default. Operation: ① Select “Output” in the main menu and press “ENTER” ②...
  • Page 19 Operating Instruction Operations: ① Select “Output” in the main menu and press “ENTER” ② Press “UP” or “DOWN” to select “ Output 1~4, all” ③ Click “ENTER” to enter the next sub-menu ④ Press “UP” or “DOWN” to select “Video” ⑤...

  • Page 20: Power

    Operating Instruction 3）DEC onoff DEC onoff can implement the audio out switch. Click “On” to turn on the audio, click “Off” to turn off the audio. It is on by default. Operations: ① Select “Output” in the main menu and press “ENTER” ②...

  • Page 21: Input

    Operating Instruction “Off” in “Power”. It is on by default. Operation: ① Select “Output” in the main menu and press “ENTER” ② Press “UP” or “DOWN” to select “ Output 1~4, all” ③ Click “ENTER” to enter the next sub-menu ④...
  • Page 22 Operating Instruction 1) Video Video can implement the on-off of input channel. All the outputs correspond to the input will have no image and audio when this input is set to “Off”. Pattern provides built-in pattern, the selected built-in pattern will replace the input source image. Operation: ①...
  • Page 23 Operating Instruction temporarily stored in the case of continuous power supply after access. Connect a new TV EDID will update. The default Modify is on. After copying the TV EDID, the audio parameter is automatically changed to LPCM2.0. If closed; The copied EDID does not modify the audio parameters. Default1 4K60 444-LPCM: 2.0-192Khz Default2...

  • Page 24: Preset

    Operating Instruction Preset Preset can save the current video, audio, EDID and system settings, supports 8 different scenes. Preset can be modified and called using WEB, commands and panel. The default preset is consistent with its factory settings. There are 4 options as follow: Clear: Remove the selected preset.
  • Page 25 Operating Instruction Demo operation: Timer can set the rotation time, the default is “Endless”, the minimum time is 3 seconds. Select indicates whether Select whether to perform the scenario in rotation. If this parameter is set to yes, the scenario will be played. If this parameter is not set to yes, the scenario will be skipped.

  • Page 26: Config

    Operating Instruction Demo Config Config can set network, RS232, LCD, OSD, MENU, user EDID, system. Gray sections cannot be selected, a higher level is required to enable the function. The level are read-only and read-write. 1) Network Network can set DHCP, IP, Mask, Gateway, Port and Mac. The Mac address cannot be changed. The default IP address is 192.168.1.200 DHCP operation: ①...
  • Page 27 Operating Instruction ④ Press “UP” or “DOWN” to select baud rate “DHCP” ⑤ Press “UP” or “DOWN” to select “No” or “Yes” to complete the operation. IP/MASK/gateway Operation: ① Select “Config” in the main menu and press “ENTER” ② Press “UP” or “DOWN” to select “ network ” ③...
  • Page 28 Operating Instruction Operation of TCP/UDP port number change ① Select “Config” in the main menu and press “ENTER” ② Press “UP” or “DOWN” to select “ network ” ③ Click “ENTER” to enter the next sub-menu ④ Press “UP” or “DOWN” to select baud rate “Port” to enter the next sub-menu ⑤...
  • Page 29 Operating Instruction Bright 0 to 8 indicates the backlight level, and 0 indicates off. Timer can be set to 3 seconds ~ Endless. Operation: ① Select “Config” in the main menu and press “ENTER” ② Press “UP” or “DOWN” to select “ Bright ” ③...
  • Page 30 Operating Instruction Menu indicates that the LCD is mapped to the TV. INFO indicates the displayed time of audio and video information. When all options set to 0 seconds, the parameters will not display. By default, User and time are Endless, menu and INFO are30 seconds.
  • Page 31 Operating Instruction Operation: ① Select “Config” in the main menu and press “ENTER” ② Press “UP” or “DOWN” to select “ Menu ” ③ Click “ENTER” to enter the next sub-menu ④ Press “UP” or “DOWN” to select “Timer” and press “ENTER” ⑤...
  • Page 32 Operating Instruction Operation: ① Select “Config” in the main menu and press “ENTER” ② Press “UP” or “DOWN” to select “ User EDID ” ③ Click “ENTER” to enter the next sub-menu ④ Press “UP” or “DOWN” to select “User1” and press “ENTER” ⑤...
  • Page 33 Operating Instruction Operation: ① Select “Config” in the main menu and press “ENTER” ② Press “UP” or “DOWN” to select “ System ” ③ Click “ENTER” to enter the next sub-menu ④ Press “UP” or “DOWN” to select “Reboot” and press “ENTER” ⑤...

  • Page 34: Info

    Operating Instruction ④ Press “UP” or “DOWN” to select “Factory” and press “ENTER” ⑤ Select “Simple” and press “ENTER” to enter the next sub-menu ⑥ Press “UP” or “DOWN” to select “Yes” to restore factory setting. Info Query device information, including input, output, system, and log. The information can only be queried and cannot be set or changed.

  • Page 35: Audio Extraction

    Operating Instruction When selecting Output,means Out1--out4 When selecting Input，means In1--In4 ：Preset ：(N/A) ：Point to Point 9. Audio Extraction HDMI audio Default HDMI audio output support uncompressed audio PCM, LPCM2.0 digital audio DTS/Dolby5.1 channel. The maximum sampling rate support 192KHZ, and it supports audio format and channel are forced into LCPM2.0.

  • Page 36: Rs232 Control

    Operating Instruction *2: The EDID sampling rate is forced to be 48Khz by default. Other audio sampling rates can be supported only when the forced modification function is disabled. 1) Analog Audio HDMI 1~4 indicates that HDMI output audio select audio from other input signal sources ①...
  • Page 37 10.2 Comport setting: Choose correct COM port that connect to PC in parameter configuration area. Serial Port Default Settings Baud Rate 115200 bps(Default) Parity Bits None Data Bits Stop Bits 10.3 Enter Port Command in Send options. 10.4 Command List 1).All commands start with “#”...

  • Page 38: Scene Instructions

    Operating Instruction 11. Scene Instructions 11.1 Video Wall Mode Remarks: Parts of the scene require switching TV ports. For Example: Out2 and out3 need to be swapped when in mode W-2x1. W-2x2：2 Vertical x 2 Horizontal W-1x2：1 Vertical x 2 Horizontal W-1x2 1x2：1 Vertical x 2 Horizontal...
  • Page 39 Operating Instruction W-1x3: 1 Vertical x 3 Horizontal W-1x4: 1 Vertical x 4 Horizontal W-2x1：2 Vertical x 1 Horizontal W-2x1 W-2x1: 2 Vertical x 1 Horizontal...
  • Page 40 Operating Instruction W-3x1: 3 Vertical x 1 Horizontal W-4x1：4 Vertical x 1 horizontal...

  • Page 41: Multi-Viewer Mode

    Operating Instruction 11.2 Multi-Viewer Mode M-2x2 M-3x1-R M-3x1-L M-3x1-U...
  • Page 42 Operating Instruction M-3x1-D M-1+234 A M-1+2 1+3 1+4 A...
  • Page 43 Operating Instruction M-1+2 3+4 A M-1+34 2+34 A M-POP A...

  • Page 44: Image Cropping And Tv Coordinate Change

    Operating Instruction M-2x1+34 A M-2x1+3 2x1+4 A 11.3 Image cropping and TV coordinate change Input starting point：CROP X0(0)，CROP Y (0)， Input ending point：CROP X1(3000)，CROP Y0(3000) Input scaling starting point：ZOOM X0(0)，ZOOM Y0(0)， Input scaling ending point：ZOOM X1(6000)，ZOOM Y0(6000)

  • Page 45: Cascading

    Operating Instruction Changing coordinates only supports operation panel; Default wall coordinates output 1 (0,0) output 2 (1,0) output 3 (0,1) output 4 (1,1); Output 1 number of wall width=2 and height=2. Other outputs must be auto. If output 1 and output TV exchange with each other; Output 1 (1,0) output 2 (0,0) output 3 (0,1) output 4 (1,1);...

  • Page 46: Web Control

    Operating Instruction 12. Web Control 12.1 Change IP address of PC Before configuring the device through the website, it is necessary to configure the IP address of the computer configured with the device (mainly to ensure that the computer and the device are set in the same network segment). 1).

  • Page 47: Log In By Browser

    Operating Instruction 3). Subnet mask set to 255.255.255.0 4). Gateway set to 192.168.1.1 Operating Instruction 12.2 Log in by browser Default IP address for log-in:192.168.1.200 Type in user name and password (default user and default password: admin) Note:suggest to use newer version of Google, Firefox, browser for better compatibility.

  • Page 48: Web

    Operating Instruction 13.1 Status In the Status interface, you can only view information but cannot modify it 2) Input INFO displays the resolution, audio and HDCP information of the input signal source 3) Output EDID Info interface will display partial EDID information of TV 4) Device Info displays MCU version and web version 13.2 Input Menu...

  • Page 49: Output Menu

    Operating Instruction 5) USER EDID can save the EDID of Bin document to User1~4. Click Browse to find the route of EDID, select User1~4 and click upload to save it. 6) Copy EDID of sink to User1~4 13.3 Output Menu 1) Rename: Output name can be changed, double click output1~4 to modify 2) Video: Click the green button to enable or disable the video outputs.

  • Page 50: Matrix

    Operating Instruction Audio Dec: Turn on/off audio separation, coaxial and analog on and off at the same time. 6) Dec Src: audio separation switching, click the drop-down list box to select hdMI1-4 and AUTO HDMI options. The options take effect automatically without confirmation. 7) Format: Output video format, the default is auto.

  • Page 51: Preset Menu

    Operating Instruction 13.5 Preset Menu Preset can be used to call, save, clean and customize the scene name. 1) Seamless matrix can complete P2P, input1, input2, input3, input4. Click the drop-down box to select "Call", click "Save" to save the current scene, and click "Clear" to clear the scene to the default value. 2) Video wall can customize the new scene.

  • Page 52: Advance

    Operating Instruction 4) Scene can save and customize scene. There are 8 scenes. The default scene is the same as factory setting. 5) Rename can change the scene name. Double click to modify the name. 13.6 Advance 1) PIP mode switch. Click the button to enable or disable the mode. 2) Crop-X0 (Image cropping starting point of horizontal coordinates, range 0~6000) Crop-Y0 (Image cropping starting point of vertical coordinates, range 0~6000)

  • Page 53: System

    Operating Instruction 13.7 System 1) Network includes Mac address, IP, mask, gate, DHCP, TCP port. Mac address cannot be modified. IP address can modified in condition that HDCP is off and a highest level account is required. 2) Account Management can revise account. A high level account cannot be modified by a low level account which can modify the current login account only.

  • Page 54: Gui Web

    Operating Instruction 14.2 GUI Web Page Upgrade Open software UART_ISP_V1.6.exe in PC, select correct port, baud rate 115200, input F0 and select a program (xxx.HTML) in path, click update to complete upgrade.

  • Page 55: Maintenance

    Operating Instruction 15. Maintenance Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner of benzine to clean this unit. 16. Product Service 1) Damage requiring service: The unit should be serviced by qualified service personnel if: (a) The DC power supply cord or AC adaptor has been damaged;...

Table of Contents