Advertisement
MT700 Service Manual
4.1.5.4. Voltage Feedback
The seconddary referenced error amplifier control system is implemented with the
TL431. The device consists if an accurate 2.5V reference, error amplifer a, and
driver. The output voltage is sensed , diveded by R5 and R6 ,and applied to the
inverting of the error amplifier is internally connected to the reference voltage . The
frequency response of the error amplifier is determinde by the compensation network
cinsisting of R3 an C1, and the high frequency gain setting R4. The optocouple diode
current is limited by R7. the optocoupler drives the error signal into the feedback pin
of PWM IC.
22
Advertisement
