Set The Clock (Clk); Change The Source (Src); Mute On/Off; Loudness On/Off - Planet Audio PC45RGB User Manual

GENERAL OPERATION (CONT.)

Set the Clock (CLK)

1. Press the CLK button to display time.
2. Press and hold the CLK button the hours digits start flashing on the display.
3. Set hours by rotating the VOL knob.
4. Briefly press the CLK button, the minute digits start flashing.
5. Set minutes by rotating the VOL knob.
6. Finally press the CLK button to confirm your settings.

Change the Source (SRC)

Press the SRC button to switch between RADIO, DISC(with a CD/MP3 disc insid the disc slot),
USB(with USB device inserted), BT audio(Bluetooth) and AUX IN(aux audio input) modes.

Mute on/off

In power on mode, briefly press the
will be also released when the volume knob is used.

Loudness on/off

Press the LOUD button to turn on the loudness to reinforce the output of bass frequencies,
press again to turn it off.
Preset EQ (Equalizer)
Press the EQ button to toggle between EQ OFF, ROCK,POP, CLASS, FLAT.

USB port

Connect to a USB storage device for audio play, or charging of a mobile phone.

Hands-free Microphone

To receive your voice when you calling by using this bluetooth handsfree system.

Aux Audio Input Jack

Connect to the headphone jack on an external device (e.g. a mobile phone or MP3 player) for audio
play.
Reset System (Reset)
The RESET button (on the front panel) is used to reset the unit.
This function may be used when the LCD does not display normally or sound is distorted, or
when any of controls are disabled. To reset the unit , use a thin object with a pointed end
to depress the RESET
6
MUTE
button.
button to toggle mute on or off. The muted state