External Label Roll Mount Installation (Optionality) - Gainscha GX-2408T Series User Manual

3.4.3 External Label Roll Mount Installation (Optionality)

1.
Mount the external label roll mount to the
bottom of the printer.
Note： When using the Gainscha External Label holder, the 1" core label spindle only supports a
radius of 12 cm / 2" core label spindle only supports a radius of 10 cm / 3" core label
spindle only supports a radius of 8.5 cm
2.
Feed the media through the rear external
label entrance chute. Then, close the top
cover carefully.
18