Setup; Setting Up The Printer - Gainscha GX-2408T Series User Manual

3. Setup

3.1 Setting up the Printer

Place the printer on a flat, stable surface, then follow the steps below:
1. Connect the cord from the power supply into the rear of the printer.
Then, plug the other end of the power cord into a power outlet.
2. Connect the printer to the computer with the provided USB cable.
3. Turn the power switch on. (The "-" is the ON position; the "○" is the OFF position.)
NOTE：
* Make sure the power switch is set to OFF position before plugging the power cord into the DC power jack.
* The interface of printer shown in picture may have some differences from the model you purchased. As for
the actual interface, please refer to the product specification.
12