Handling And Operation; Before Initial Use - Silvercrest SKGE 2000 C3 Operating Instructions Manual

Handling and operation

This section provides you with important information on handling and using the
appliance.

Before initial use

1) Clean all accessories as described in the section "Cleaning and care" to
remove any production residues.
2) Read these operating instructions carefully.
3) Install the appliance in accordance with the safety instructions.
4) Unlock the appliance by setting the safety catch 2 to the position
5) Open the appliance.
6) Wipe the hotplates 0 with a damp cloth.
7) Close the appliance.
8) Insert the power cable plug into a properly connected and earthed mains
power socket which supplies the voltage stated in the "Technical data" sec-
tion. Allow the appliance to heat up for about 5 minutes on the maximum
temperature setting by turning the heat level control 6 to MAX.
NOTE
► The first time the appliance heats up, a small amount of smoke and odour
may be generated due to production-related residue. This is normal and is
completely harmless. Ensure sufficient ventilation; for example, by opening
a window.
9) After heating, pull the plug out of the mains socket and allow the appliance
to cool down completely.
10) Clean the appliance again with a damp cloth.
SKGE 2000 C3
.
GB │ IE │ 9 ■