Handling And Operation; Before Initial Use - Silvercrest 300874 Operating Instructions Manual

Handling and operation

This section provides you with important information on handling and using the
appliance .

Before initial use

1) Clean all accessories as described in the section "Cleaning and care" to
remove any production residues .
2) Read these operating instructions carefully .
3) Install the appliance in accordance with the safety instructions .
4) Unlock the appliance by setting the safety catch 2 to the position
5) Open the appliance .
6) Wipe the hotplates 0 with a damp cloth .
7) Close the appliance .
8) Insert the power cable plug into a properly connected and earthed mains
power socket which supplies the voltage stated in the "Technical data" sec-
tion . Allow the appliance to heat up for about 5 minutes on the maximum
temperature setting by turning the heat level control 6 to MAX .
NOTE
► The first time the appliance heats up, a small amount of smoke and odour
may be generated due to production-related residue . This is normal and is
completely harmless . Ensure sufficient ventilation; for example, by opening
a window .
9) After heating, pull the plug out of the mains socket and allow the appliance
to cool down completely .
10) Clean the appliance again with a damp cloth .
SKGE 2000 C3 GB │ IE │ NI │ CY │
.
9 ■