Package Contents And Transport Inspection; Unpacking; Disposal Of Packaging Materials - Silvercrest SKGE 2000 C3 Operating Instructions Manual

Package contents and transport inspection

The appliance is supplied with the following components as standard
(see fold-out page):
● 3-in-1 contact grill
● Fat collector tray
● Cleaning scraper
● Operating instructions
NOTE
► Check the package for completeness and for signs of visible damage.
► If the delivery is incomplete or damage has occurred as a result of defective
packaging or during transport, contact the Service hotline (see chapter
entitled Service).

Unpacking

♦ Remove all parts of the appliance and the operating instructions from the
box.
♦ Remove all packaging materials and any films and labels.

Disposal of packaging materials

The packaging protects the appliance from damage during transport.
The packaging materials have been selected for their environmental friendliness
and ease of disposal, and are therefore recyclable.
Returning the packaging into the material cycle conserves raw materials and
reduces the amount of waste generated. Dispose of packaging materials that
are no longer needed in accordance with applicable local regulations.
Dispose of the packaging in an environmentally friendly manner.
Note the labelling on the packaging and separate the packaging material
components for disposal if necessary. The packaging material is labelled with
abbreviations (a) and numbers (b) with the following meanings:
1–7: Plastics,
20–22: Paper and cardboard,
80–98: Composites.
NOTE
► If possible, keep the appliance's original packaging during the warranty
period so that the appliance can be packed properly for return shipment
in the event of a warranty claim.
■ 8 │ GB │ IE
SKGE 2000 C3