Sony DCR-HC15 Operation Manual page 85

Changing the menu settings
Icon/item Mode
OTHERS
WORLD TIME
BEEP
z MELODY
DISPLAY
z LCD
REC LAMP z ON
VIDEO EDIT
z READY
Note
If you press DSPL/BATT INFO with DISPLAY set to V-OUT/LCD in the menu
settings, the picture from a TV or VCR will not appear on the LCD screen even when
your camcorder is connected to the output jacks on the TV or VCR.
When recording a close subject
When REC LAMP is set to ON, the red camera recording lamp on the front of your
camcorder may reflect on the subject if it is close. In this case, we recommend you set
REC LAMP to OFF.
In more than 5 minutes after removing the power source
The PROGRAM AE, AUDIO MIX, WHT BAL, and HiFi SOUND items are returned to
their default settings.
Other menu items are held in memory even when the power source is removed.
Meaning
—— To set the clock to the local time. Press r/R to set a
time difference. The clock changes by the time
difference you set here. If you set the time
difference to 0, the clock returns to the originally
set time.
To output the melody when you start/stop
recording or when an unusual condition occurs
on your camcorder
NORMAL To output the beep instead of the melody
OFF To cancel melody, the beep sound and shutter
sound
To show the display on the LCD screen and
viewfinder
V-OUT/LCD To show the display on the TV screen, LCD screen
and viewfinder
To light up the camera recording lamp at the front
of your camcorder
OFF To turn the camera recording lamp off so that the
person is not aware of the recording
To make programs and perform Digital program
editing on the tape (p. 60)
POWER
switch
85