Sony DCR-HC15 Operation Manual page 64

Dubbing only desired scenes – Digital program editing
To return to FN
Press
Notes
•When you complete "Step 3: Adjusting the synchronization of the VCR," the image to
adjust the synchronization is recorded for about 50 seconds.
•If you start recording from the very beginning of the tape, the first few seconds of the
tape may not be recorded properly. Be sure to allow about 10 seconds' lead before
starting the recording.
•When the recording unit cannot be operated properly by the i.LINK cable, leave the
connection as it is, and make the A/V connecting cable settings (p. 60). Video and
audio are sent by digital signals.
64
2
V I DEO ED I T
ED I T SET
CONTROL
ADJ TEST RETURN
"CUT - I N" EXECUTE
"CUT -OUT"
I R SETUP ENGAGE
REC PAUSE
PAUSEMODE
I R TEST
EXEC
6
V I DEO ED I T
ED I T SET
CONTROL
ADJ TEST
0
"CUT - I N"
"CUT -OUT"
I R SETUP
PAUSEMODE
I R TEST
EXEC
END to return to PAGE1, then press EXIT.
3
END V I DEO ED I T
ED I T SET
CONTROL
ADJ TEST
"CUT - I N"
"CUT -OUT"
I R SETUP
PAUSEMODE
I R TEST
RET.
8
END
V I DEO ED I T
ED I T SET
CONTROL
ADJ TEST
"CUT - I N"
"CUT -OUT"
I R SETUP
PAUSEMODE
I R TEST
RET.
END
COMPLETE
EXEC RET.
END
0
EXEC RET.