Sony DCR-HC15 Operation Manual page 61

Dubbing only desired scenes – Digital program editing
(10) Select PAUSEMODE, then press EXEC.
(11) Select the mode to cancel recording pause on the VCR, then press EXEC.
The correct button depends on your VCR. Refer to the operating
instructions of your VCR.
(12) Locate the infrared rays emitter of your camcorder and face it towards the
remote sensor of the VCR about 30 cm (12 in.) apart.
(13) Insert a recordable tape into the VCR, then set the VCR to recording
pause.
(14) Select IR TEST, then press EXEC.
(15) Select EXECUTE, then press EXEC.
If the VCR starts recording, the setting is correct.
The indicator you selected to cancel recording pause on the VCR flashes
on the screen. When finished, the indicator changes to COMPLETE.
END
V I DEO ED I T
ED I T SET
CONTROL
ADJ TEST
"CUT - I N"
"CUT -OUT"
I R SETUP
PAUSE
PAUSEMODE REC
I R TEST
PB
EXEC RET.
Infrared
rays emitter
END
V I DEO ED I T
ED I T SET
CONTROL
ADJ TEST
"CUT - I N" ENGAGE
"CUT -OUT" REC PAUSE
I R SETUP
PAUSEMODE RETURN
EXECUTE
I R TEST
EXEC RET.
END
V I DEO ED I T
ED I T SET
CONTROL
ADJ TEST
"CUT - I N"
"CUT -OUT"
I R SETUP
PAUSEMODE PAUSE
I R TEST
EXEC RET.
VCR
Remote sensor
END
V I DEO ED I T
ED I T SET
CONTROL
ADJ TEST
"CUT - I N"
"CUT -OUT"
I R SETUP
PAUSEMODE
COMPLETE
I R TEST
EXEC RET.
61