Sony DCR-HC15 Operation Manual page 58

Dubbing tape
Dubbing
If you are connecting the VCR with the A/V connecting cable
•Set DISPLAY in
•If you want to dub the data code, display it on the screen.
•If you want to dub the title, set TITLE DSPL in
default setting is ON.)
If you are connecting the VCR with the i.LINK cable
•Recording of only the picture or sound cannot be done.
•Titles, screen indicators, and Cassette Memory contents cannot be recorded.
The POWER switch should be set to
(1) Insert a blank tape (or the tape you want to record over) into the VCR, and
(2) Prepare the VCR for recording. If the VCR has an input selector, set it to input.
(3) Play back the recorded tape on your camcorder.
(4) Start recording on the VCR.
When you have finished dubbing the tape
Press x on both your camcorder and the VCR.
You can edit on VCRs that support the following systems
8 mm
Betamax
If your VCR is a monaural type
Connect the yellow plug of the A/V connecting cable to the video input jack and the
white or the red plug to the audio input jack on the VCR or the TV. When the white
plug is connected, the left channel audio is output, and when the red plug is connected,
the right channel audio is output.
If your VCR has an S video jack
See page 37 for details.
About i.LINK
See page 100 for details.
Pictures processed by picture effect
These are not output through the DV Interface.
If you record a paused playback picture
•The recorded picture becomes rough with the DV Interface.
•The picture may jitter when you play back the picture using other video equipment.
58
to LCD in the menu settings. (The default setting is LCD.)
insert the recorded tape into your camcorder.
Refer to the operating instructions of the VCR.
Refer to the operating instructions of your VCR.
, Hi8 , Digital8
, ED Betamax
.
, VHS , S-VHS
, mini DV , DV
to ON in the menu settings. (The
, VHSC , S-VHSC
and MICROMV
,