Sony DCR-HC15 Operation Manual page 22

Recording a picture
Indicators displayed during recording
Indicators are not recorded on the tape.
40
min
JUL 14 2004
Remaining battery time indicator during recording
The remaining battery time indicator roughly indicates the continuous recording time.
The indicator may not be correct, depending on the conditions in which you are
recording. When you close the LCD panel and open it again, it takes about 1 minute for
the correct remaining battery time in minutes to be displayed.
Time code
The time code indicates the recording or playback time, "0:00:00" (hours : minutes :
seconds) in CAMERA and "0:00:00:00" (hours : minutes : seconds : frames) in VCR.
You cannot rewrite only the time code later.
Recording data
The recording data (date/time or various settings when recorded) are not displayed
during recording. However, they are recorded automatically on the tape. To display the
recording data, press DATA CODE during playback.
22
Remaining battery time
Cassette Memory
This appears when using a cassette with Cassette Memory.
Recording mode
STBY/REC
Time code/Tape counter
REC 0:00:01
60min
Remaining tape
This appears after you insert and run the cassette for
a while (p. 83).
12:05:56PM
FN button
FN
Press this button to display operation buttons on the
LCD screen.
Time
The time appears about 5 seconds after the power
is turned on.
Date
The date appears about 5 seconds after the power
is turned on.