Subscribe to Our Youtube Channel
Related Manuals for Girard Systems 98GC2763B
Summary of Contents for Girard Systems 98GC2763B
- Page 1 98GC2763B MULTI CHANNEL WALL SWITCH PRODUCT DESCRIPTION The 98GC2763B is a Multichannel RF transmitter, powered by three 3v Lithium batteries (CR2430) designed to control up to 20 awnings. See figure 8 for description of each pad.
- Page 2 Fig.8 Programming a Wall Switch to 98GC274B a. Supply power to the GC274B b. Press and hold the MIDDLE and RIGHT buttons on the GC274 (Fig 3) for about 3 seconds until the Green LED starts to flash. c. Press STOP (Fig. 1): The Green LED will stop blinking and remain illuminated. d.
- Page 3 To find the batteries turn the wall switch over and using a small flate screw driver pull the cover off, the cover has the word “open” on the right bottom corner, see Fig.9 below. • The Battery compartment, (into which three CR2430 3v Lithium battery should be inserted as shown) Fig.9 Magnetic Holder.- This new G link transmitter was designed with a magnetic plate...
Need help?
Do you have a question about the 98GC2763B and is the answer not in the manual?
Questions and answers