Regulatory Compliance - Clarity C600 User Manual

Part 68 of FCC Rules Information
a) This equipment complies with Part 68 of the
FCC rules and the requirements adopted by the
ACTA. On the bottom of this equipment is a
label that contains, among other information, a
product identifier in the
format US:AAAEQ##TXXXX. If requested,
this number must be provided to the telephone
company.
b) A plug and jack used to connect this equip-
ment to the premises wiring and
telephone network must comply with the appli-
cable FCC Part 68 rules and requirements
adopted by the ACTA.A compliant telephone
cord and modular plug, RJ11C USOC, is provid-
ed with this product. It is designed to be con-
nected to a compatible modular jack that is also
compliant. See installation instructions for
details.
c) The REN is used to determine the number of
devices that may be connected to a telephone
line. Excessive RENs on a telephone line may
result in the devices not ringing in response to
an incoming call. In most but not all areas, the
sum of RENs should not exceed five (5.0).To be
certain of the number of devices that may be
connected to a line, as determined by the total
RENs, contact the local telephone company. For
products approved after July 23, 2001, the REN
for this product is part of the product identifier
that has the format US:AAAEQ##TXXXX.
The digits represented by ## are the REN with-
out a decimal point (e.g., 03 is a REN
of 0.3). For earlier products, the REN is
separately shown on the label.
28

Regulatory Compliance

d) If this telephone equipment causes harm to
the telephone network, the telephone company
will notify you in advance that temporary dis-
continuance of service may be required. But if
advance notice isn t practical, the telephone
company will notify the customer as soon as
possible.Also, you will be advised of your right
to file a complaint with the FCC if you believe it
is necessary.
e) The telephone company may make changes in
its facilities, equipment, operations or proce-
dures that could affect the
operation of the equipment. If this happens the
telephone company will provide
advance notice in order for you to make
necessary modifications to maintain
uninterrupted service.
f) If trouble is experienced with this telephone
equipment, for repair or warranty information,
please contact Clarity, 1-800-552-3368. If the
equipment is causing harm to the telephone net-
work, the telephone company may request that
you disconnect the equipment until the problem
is resolved.
g) This telephone equipment is not intended to
be repaired and it contains no repair-
able parts. Opening the equipment or
any attempt to perform repairs will void
the warranty. For service or repairs, call
1-800-552-3368.
h) Connection to party line service is subject to
state tariffs. Contact the state public utility com-
mission, public service commission or corpora-
tion commission for information.