Instructions For The Installer; Technical Data; Installing The Appliance; Transportation, Unpacking - Satrap Coop oecoplan 67 KS A+ Instruction Book

GB
Ins
Ins

Technical data

Model
Gross capacity (l)
Net capacity (l)
Width (mm)
Height (mm)
Depth (mm)
Energy consumption (kWh/24h)
(kWh/year)
Energy class, according to EU standards
Rated current (A)
Weight (kg)

Installing the appliance

Transportation, unpacking

It is recommended to deliver the appliance in
original packaging,
considering the protective warning on packaging.
After each transportation the appliance must not be
switched on for approx. 2 hours.
Unpack the appliance and check if there are damages
on it. Report possible damages immediately to the
place you bought it. In that case retain packaging.

Cleaning

Remove every adhesive tape, which ensure the parts
not to move in the appliance.
Wash the inside of the appliance using lukewarm
water and mild detergent. Use soft cloth.
After cleaning wipe out the inside of the appliance.

Placement

The ambient temperature has an effect on the energy
consumption and proper operation of the appliance.
When placing, take into consideration that it is
practical to operate the appliance between ambient
temperature limits according to the climate class that
is given in the chart below and can be found in the
data label.
Class of climate
SN
N
ST
42
tr uctions f
tr uctions f
OECOPLAN 67 KS A+
Ice-making comp.: 5
Fresh food comp.: 65
Ice-making comp.: 5
Fresh food comp.: 62
525
520
587
0,299
109
A+
0,6
24
in vertical position
Ambient temperature
+10 ... +32 °C
+16 ... +32 °C
+18 ... + 38 °C
or the Ins
or the Ins
t aller
t aller