Entering Guard Station And Entrance Station Information - Aiphone GT Series Quick Start Installation Manual

PROGRAMMING:
Programming Guard/Entrance Information
Step 1: Click the + Guard Station , then select the guard station to program. Click Entrance Info, then enter 1 for
the Section ID. Enter the Entrance ID (1-16), Entrance #, and Entrance Name (not required).
Step 2: Click Guard St Info, then enter 1 for the Section ID. Enter the Guard St. ID (1-2), Guard St. # and Guard
St Name (not required) of the other guard station in the system.
Note: This step is not required if only using 1 guard station.
Step 3: Click the +Entrance ,then select an entrance station. Repeat Step 2 to enter the Guard St Info for each
entrance station. Since entrance stations cannot call other entrance stations, only guard station information
will be entered for the entrance station.
, and then Yes .
Step 4: Click Save

ENTERING GUARD STATION AND ENTRANCE STATION INFORMATION

9