4 × 1000base-tx gigabit ports nway 10/100/1000base-tx smart all gigabit ethernet switch with vlan, priority, broadcast storm control and port-mirror function (56 pages)
Page 2
OvisLink Corp. OvisLink Corp. has made the best effort to ensure the accuracy of the information in this user’s guide. However, we are not liable for the inaccuracies or errors in this guide. Please use with caution.
1.2 How to Use This Guide AirMax5N is an advanced wireless CPE with many functions. It is recommended that you read through the entire user’s guide whenever possible. The user guide is divided into different chapters. You should read at least go through the first 3 chapters before attempting to install the device.
Page 7
Chapter 4 Web Management – Wireless and WAN Settings: This chapter explain the wireless functions and router mode settings in the AirMax5N. If time permitted, you should read through the entire chapter. 4.2 Operation Mode (wireless): Operation mode is the page where all the wireless settings and router mode settings are.
FAQ are frequently updated with latest information. In addition, you might find new firmwares that either increase software functions or provide bug fixes for AirMax5N. You can reach our on-line support center at the following link: http://www.airlive.com/support/support_2.jsp Since 2009, AirLive has added the “Newsletter Instant Support System” on our website.
The AirMax5N can be configured to operate in the following wireless operation modes: 1.5.1 Access Point Mode When operating in the Access Point mode, the AIRMAX5N becomes the center hub of the wireless network. All wireless cards and clients connect and communicate through AirMax5N.
1. Introduction 1.5.2 Repeater Mode In Repeater mode, the AIRMAX5N functions as a repeater that extends the range of remote wireless LAN. The AirMax5N’s repeater mode is a universal repeater, not WDS repeater. Because the radio is divided into client + AP mode, the Repeater mode will have less performance and distance.
Access Point. Users can attach a computer or a router to the LAN port of AirMax5N to get network access. This mode is often used by WISP on the subscriber’s side.
LAN is the wired side. 1.5.7 AP Router Mode In AP Router Mode, the AirMax5N behaves like a wireless router. The non-PoE port of the AirMax5N will become WAN port. Both the wireless and the passive PoE port of AirMax5N becomes the LAN side.
PoE Ethernet Cable. You can use a good quality CAT-5E outdoor graded Ethernet cable (shielded with anti-UV) according to the length you need. The AirMax5N must be installed in the upright position if the unit is located in outdoor or wet environments.
2. Installing the AirMax5N 2.2 Package Content The AIRMAX5N package contains the following items: One AIRMAX5N main unit One 12V 1A DC power adapter Passive PoE DC Injector 1 x Plastic Straps User’s Guide CD Quick Start Guide The PoE Ethernet cable is not included in the package. You may choose an outdoor specification Ethernet cable according to the length you need.
Page 16
2. Installing the AirMax5N ED Behavior LED Indicator State Description The WLAN Broadband Router is powered ON. 1. PWR LED The WLAN Broadband Router is powered Off. Wireless Radio ON. 2. WLAN LED Wireless Radio Off. Flashing Data is transmitting or receiving on the wireless.
2. Installing the AirMax5N 2.4 Hardware Installation Please prepare a screw driver and an outdoor graded PoE Ethernet cable with adequate length according to your need. 1. Push the button in the side to remove 2. Pass through Ethernet cable from the hole;...
2. Installing the AirMax5N 2.4.1 Standard Pole Mount Your AirMax5N comes standard with 1 plastic straps for pole mounting. Please follow the procedure below to install: 1. Put the plastic strap through the holes on 2. Thread the thinner end of the strap into the Pole Mount holders.
Page 19
Connect the converter cable to the antenna port. Please run the cable through the cable hole Push back the cover. You should connect the AirMax5N to an external antenna before power on to avoid damaging the RF AirLive AirMax5N User’s Manual...
If you have forgotten your AirMax5N’s IP address or password, you can restore your AirMax5N to the default settings by pressing on the “reset button” for more than 5 seconds. The reset button is located on the PoE Kit. Please see diagram below for details.