Mini CLUBMAN Owner's Manual page 285

3. Press button, arrow 1, and pull out the
wiper blade, arrow 2.
4. Attach a new wiper blade. The wiper
blade must engage audibly.
5. Fold in the wiper arm.
Replacing rear wiper blades
1. Fold up and hold the wiper arm firmly.
2. Turn back the wiper blade to the stop.
3. Push the wiper blade out of the fasten-
ing by continuing to turn it to the stop.
4. Insert the new wiper blade by following
the steps in reverse order. The wiper
blade must engage audibly.
5. Fold in the wiper arm.
Replacing components
Online Edition for Part no. 01405A541A8 - II/22
Light and bulb replacement
General information
Lights and bulbs
Lights and bulbs make an essential contri-
bution to driving safety.
Except for the side turn signal lamps and
the lights in the rear bumper, all headlights
and lights are designed in LED technology.
The manufacturer of the vehicle recom-
mends that you have appropriate work per-
formed by a dealer's service center or an-
other qualified service center or repair shop
if you are unfamiliar with it or if it has not
been described here.
A replacement bulb set is available from a
dealer's service center or another qualified
service center or repair shop.
Follow the safety information, refer to
page 285.
Light-emitting diodes (LEDs)
Some items of equipment use light-emitting
diodes installed behind a cover as a light
source. These light-emitting diodes are re-
lated to conventional lasers and are offi-
cially designated as Class 1 light-emitting
diodes.
Follow the safety information, refer to
page 285.
Safety information
Lights and bulbs
Warning
Bulbs can get hot during operation. Con-
tact with the bulbs can cause burns. There
is a risk of injury. Only change bulbs after
they have cooled off.
MOBILITY
285