Mini CLUBMAN Owner's Manual page 107

– Steptronic transmission: change from
selector lever position D to R, N or M/S.
– Steptronic transmission: change from
selector lever position P to R, N, D or
M/S.
– The vehicle begins rolling.
– Window condensation when the auto-
matic climate control is switched on.
– The vehicle battery charge is very low.
– Excessive cooling of the car's interior
when the heating is switched on.
– Manual transmission: low brake vacuum
pressure; this can occur, for instance if
the brake pedal is depressed a number
of times in succession.
Additional Auto Start/Stop
function
Depending on the vehicle equipment and
country-specific version, the vehicle fea-
tures a variety of sensors for assessing the
traffic situation. The Auto Start/Stop func-
tion uses this information to adapt to vari-
ous traffic situations in a proactive manner.
For instance, this applies to the following
situations:
– When a situation is detected in which
the stopping time is expected to be very
short, the engine is not switched off au-
tomatically. A message appears on the
Control Display, depending on the situa-
tion.
– When a situation is detected in which
the vehicle needs to drive off immedi-
ately, the engine is started automati-
cally.
The function may be restricted if the navi-
gation data is invalid, outdated or not avail-
able, for example.
Online Edition for Part no. 01405A541A8 - II/22
Driving
Switching the system on/off
Using the button
Press the button.
– LED comes on: Auto Start/Stop function
is deactivated.
The engine is started during an auto-
matic engine stop.
The engine can only be stopped or
started via the Start/Stop button.
– LED goes out: Auto Start/Stop function
is activated.
Switching off the vehicle during an
automatic engine stop
During an automatic engine stop, the vehi-
cle can be switched off permanently, for in-
stance when leaving it.
Steptronic transmission:
1. Engage selector lever position P.
2. Press the Start/Stop button. The ignition
is switched off. The Auto Start/Stop
function is deactivated.
3. Set the parking brake.
Manual transmission:
1. Press the Start/Stop button. The ignition
is switched off. The Auto Start/Stop
function is deactivated.
2. Shift into first gear or reverse.
3. Set the parking brake.
CONTROLS
107