Dvd Changer Operations; Tv Operations - Clarion VRX935VD Owner's Manual & Installation Manual

DVD Changer Operations

This function allows you to control a connected
DVD changer in the same way as described in
DVD player Operation.
For details on operations other than those de-
scribed below, see DVD player Operation. For
details on DVD changer precautions, refer to the
supplied owner's manual.
Selecting a disc
When the panel is closed :
Each of the [DIRECT] button corresponds to a
disc loaded into the DVD changer.
Press the [DIRECT] button (1 to 6) and select
the desired disc.
When the panel is open :
Press the [LIST] button, otherwise press the
[DISC SEL] button on the remote control unit.
Touch the [DIRECT] key (1 to 6) in the display or
press the numeric button for the disc number (1
to 6) on the remote control unit to select the de-
sired disc.
Switching to a next disc. (Disc Up
function)
The disc up function plays from the first track
(track No.1) of the next disc.
Press the [BAND] button.
Each time you press the [BAND] button, the disc
changes to the next disc.
Disc Repeat playback
This operation plays back all tracks on the disc
repeatedly.
There are 3 ways available :
• Press the [KEY PAD] button and touch the
[D.RPT] key.
• Touch the screen and touch the [SUB MODE]
key. Touch the [DISC REPEAT] key then touch
the [RTN] key.
• Press the [RPT] button on the remote control
unit 1 second or longer.
To cancel the disc repeat play, touch the [D.RPT]/
[DISC REPEAT] key or press the [RPT] button on
the remote control unit.

TV Operations

TV functions
When an optional TV tuner is connected through
the CeNET cable, this unit controls all TV tuner
functions. To watch TV requires a TV tuner.
WARNING
For your safety, the driver should not
watch the TV or operate the controls while
driving. Please note that watching and op-
erating the TV while driving are prohibited
by law in some countries.
Watching TV
Notes:
• For your safety, the VRX935VD has a safety func-
tion which turns off the picture when the car is
moving, so only the audio can be heard. The pic-
ture can only be watched when the car is stopped
and the parking break is applied.
1. Press the [FUNC] button and select the TV
mode.
2. Press the [BAND] button to select the de-
sired TV band (TV1 or TV2). Each time the
button is pressed, the input selection toggles
between TV1 and TV2.
3. Press the [d] or [a] button to tune in the
desired TV station.
When the panel is open, the same operation
is also available by using the [a] and [d]
button in the panel.
Watching a video
The TV tuner has a VTR input terminal to which
1 external device can be connected. Connect a
12V video cassette player (VCP) or video cas-
sette recorder (VCR) to the TV tuner input termi-
nal.
1. Touch the screen or press the [LIST] button,
the MENU screen appears.
2. Touch the [EXTRA SELECT] key in the
MENU screen to select the [VTR] key.
3. To return to the TV broadcast, touch the
screen again and touch the [EXTRA SE-
LECT] key in the MENU screen to select the
[TELEVISION] key.
49
VRX935VD