Dcp - Clarion VRX935VD Owner's Manual & Installation Manual

8. DCP

The control panel can be detached to prevent
theft. When detaching the control panel, store it
in the DCP (DETACHABLE CONTROL PANEL)
case to prevent scratches.
We recommend taking the DCP with you when
leaving the car.
Removing the DCP
1. Turn the power off.
2. Slide the [RELEASE] lever leftward to re-
lease the DCP/Operation Panel.
DCP
3. Pull the DCP toward you and remove it.
DCP
Attaching the DCP
1. Insert the DCP so that the A section on the
left side of the DCP catches on the hook B
on the unit.
B
A
DCP
2. Press the right side of the DCP carefully to fit
it in place.
DCP
3. Press the [FUNC] button to turn on the
power.
CAUTION
• The DCP can easily be damaged by shocks. Af-
ter removing it, be careful not to drop it or sub-
ject it to strong shocks.
• If the Operation Panel is kept open, the DCP may
drop due to vibration of the car. This results in
damage to the DCP. So close the Operation
Panel or remove the DCP to store into the case.
• The DCP is an extremely important part. Be care-
ful not to damage it by pressing on it with fin-
gernails, screwdrivers, etc.
• In case the Control Panel is kept open
When you detach the DCP, the panel is to be
stored automatically after a warning sound.
When you attach the DCP, the panel is to come
out to its original position after a warning sound.
Note:
• If the DCP is dirty, wipe off the dirt with a soft, dry
cloth only.
17
VRX935VD