Clarion VRX935VD Owner's Manual & Installation Manual page 22

Radio Operations
Seek tuning
1. Press the [BAND] button and select the de-
sired band. (FM or AM)
2. Tune in to a station.
If "MANU" is lit in the display press and hold
the [BAND] button for 1 second or longer.
"MANU" in the display goes off and seek tun-
ing is now available.
3. Press the [a] or [d] button to automatically
seek a station.
When the [d] button is pressed, the station
is sought in the direction of higher frequen-
cies; when the [a] button is pressed, the
station is sought in the direction of lower fre-
quencies.
When the panel is open, the same operation
is also available by using the [a] and [d]
button in the panel.
Selecting stations with the KEY PAD
This function displays the KEY PAD on the screen
enabling you to tune in through auto store, preset
scan or by entering a frequency.
Press the [KEY PAD] button to display the KEY PAD.
Tuning in by selecting a frequency
1. Touch the [SRCH] key to switch the KEY
PAD.
2. Touch the [0]~[9] key corresponding with the
frequency you desired. When you touch the
wrong number ([0]~[9] key), you can cancel
that to touch the [DEL] key.
3. Touch the [ENT] key. The radio station you
required would be tuned.
To use auto store,
touch the [AS] key for about 2 seconds.
To perform a preset scan,
touch the [PS] key.
To cancel the KEY PAD display,
press the [KEY PAD] button or touch the [OFF]
key.
26
VRX935VD
Manual tuning
There are 2 ways available: Quick tuning and
step tuning.
When you are in the step tuning mode, the fre-
quency changes one step at a time. In quick tun-
ing mode, you can quickly tune the desired fre-
quency.
1. Press the [BAND] button and select the de-
sired band. (FM or AM)
If "MANU" is not lit in the display, press and
hold the [BAND] button for 1 second or longer.
"MANU" appears in the display and manual
tuning is now available.
2. Tune into a station.
Quick tuning:
Press and hold the [a] or [d] button for 1
second or longer to tune in a station.
Step tuning:
Press the [a] or [d] button to manually
tune in a station.
Recalling a preset station
A total of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) exists to store individual radio sta-
tions in memory. Pressing the corresponding
[DIRECT] button recalls the stored radio fre-
quency automatically.
There are 2 ways available to recall the preset
station.
Using the [DIRECT] buton.
1. Press the [BAND] button and select the de-
sired band. (FM or AM)
2. Press the corresponding [DIRECT] button to
recall the stored station.
Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store that station
into preset memory.
Using the [DIRECT] key.
1. Press the [LIST] button or touch the screen
when the STANDARD screen is displayed,
then touch the [P.CH SELECT] key.
2. Touch the corresponding [DIRECT] key to re-
call the stored station.
You can select the desired band to touch the
[BAND] key.
3. Touch the [RTN] key or press the [LIST] but-
ton to return to the previous mode.