Clarion VRX935VD Owner's Manual & Installation Manual page 46

TV Operations
Seek tuning
1. Press the [BAND] button and select the de-
sired TV band (TV1 or TV2).
If "MANU" is lit in the display, press and hold
the [BAND] button for 1 second or longer.
"MANU" in the display goes off and seek tun-
ing is now available.
2. Press the [d] or [a] button to automatically
seek a station. Press the [d] button to auto-
matically tune up the frequency band to the
next available TV station; press the [a] but-
ton to automatically tune down.
When the panel is open, the same operation
is also available by using the [a] or [d] but-
ton in the panel.
Selecting stations with the KEY
PAD
This function displays the KEY PAD on the screen
enabling you to tune in through auto store, preset
scan or by entering a frequency.
Press the [KEY PAD] button to display the KEY
PAD.
Tuning in by selecting a frequency
1. Touch the [SRCH] key to switch the KEY
PAD.
2. Touch the [0]~[9] key corresponding with the
frequency you desired. When you touch the
wrong number ([0]~[9] key), you can cancel
that to touch the [DEL] key.
3. Touch the [ENT] key. The radio station you
required would be tuned.
To use auto store,
touch the [AS] key for about 2 seconds.
To perform a preset scan,
touch the [PS] key.
To cancel the KEY PAD display,
press the [KEY PAD] button or touch the [OFF]
key.
50
VRX935VD
Manual tuning
There are 2 ways available: Quick tuning and
step tuning. When you are in the step tuning
mode, the frequency changes one step at a
time. In quick tuning mode, you can quickly tune
the desired frequency.
1. Press the [BAND] button and select the de-
sired band. (TV1 or TV2)
If "MANU" is not lit in the display, press and
hold the [BAND] button for 1 second or longer.
"MANU" appears in the display and manual
tuning is now available.
2. Tune into a station.
Quick tuning:
Press and hold the [d] or [a] button for 1 sec-
ond or longer to tune in a station.
Step tuning:
Press the [d] or [a button to manually tune in
a station.
Note:
• Manual tuning is cancelled if you do not operate the
unit for 7 seconds longer. ( Only when connecting
the TTX7503Z or TTX7504Z with this unit)
Recalling a preset station
A total of 12 TV stations can be stored (6-TV1
and 6-TV2). This allows you to select your favor-
ite TV stations and store them in memory for
later recall.
There are 2 ways available to recall the preset
station.
Using the [DIRECT] buton.
1. Press the [BAND] button and select the de-
sired TV band. (TV1 or TV2)
2. To recall a stored TV station, press the de-
sired [DIRECT] button to select that station.
Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the current
station into the preset memory.
Using the [DIRECT] key.
1. Press the [LIST] button or touch the screen
when the STANDARD screen is displayed,
then touch the [P.CH SELECT] key.
2. Touch the corresponding [DIRECT] key to re-
call the stored station.
You can select the desired band to touch the
[BAND] key.
3. Touch the [RTN] key or press the [LIST] but-
ton to return to the previous mode.