Clarion VRX935VD Owner's Manual & Installation Manual page 40

VISUAL Operations
Lock system monitor image and sound
( 1)
Visual 2 connection
Front image Image of device
(receiver connected to the
screen) Visual 2 terminal
( 3)
Rear monitor Image of device
image connected to the
(separately Visual 2 terminal
sold) ( 3)
Vehicle speaker Plays sound of mode selected using the [FUNC] button
sound
1 A device connected to the Visual 2 terminal should be set up as described in the section "Switch-
ing Connect."
2 No image is displayed on the rear monitor when a non-image mode such as radio, SIRIUS, CD, etc.
is engaged.
3 For safety reasons, this image is not displayed when the vehicle is moving. The picture can be
watched only when the vehicle is standing still and the parking brake is engaged.
2-ZONE: 1 (front monitor lock)
1. Press the [M.L] button.
2. Press the [FUNC] button to select the de-
sired mode.
3. To cancel the monitor lock, press the [M.L]
button.
The screen shows the image of the selected
mode.
When the front monitor lock is engaged,
[MENU], [LIST], [KEY PAD], [ADJ] and [A-M]
button cannot be used. Cancel the monitor
lock when you wish to use these buttons.
2-ZONE: 2 (rear monitor lock)
1. Press the [ADJ] button to display the AD-
JUST MODE menu.
2. Touch the [REAR MONI LOCK] key and the
[ON] key.
3. Touch the [RTN] key or press the [ADJ] but-
ton.
4. To cancel the monitor lock, press [ADJ] but-
ton, touch the [REAR MONI LOCK] key and
the [OFF] key.
44
VRX935VD
2 ZONE
Front monitor lock
Visual 2 connection
[OTHERS] [NAVI]
Image of device
connected to the
Visual 2 terminal
Displays image of
mode selected
using the [FUNC]
button ( 2)
Rear monitor
lock
Displays image of
mode selected
using the [FUNC]
button
Image of device connected to the
Visual 1 terminal
5. Touch the [RTN] key or press the [ADJ] but-
ton.
The monitor lock is now canceled.
Locking the front monitor and rear
monitor (3-ZONE)
1. Lock the rear monitor by performing the in-
structions in steps 1 to 3 above.
2. Press the [M.L] button to lock the front moni-
tor.
3. Press the [FUNC] button.
The image for the selected mode is dis-
played for about 5 seconds after which the
front monitor lock image is displayed.
4. To cancel the monitor lock, press the [M.L]
button.
5. To cancel the rear monitor lock, press the
[ADJ] button, touch the [REAR MONI LOCK]
key and the [OFF] key.
3 ZONE
Image of device
connected to the
Visual 2 terminal
( 3)