Direct Access Tuning; Station Preset Memory; Auto Memory Entry; Preset Tuning - Kenwood Ez900HDS Instruction Manual

Function of the Ez700SR
Tuner features
Function of remote

Direct Access Tuning

Entering the frequency and tuning.
1
Select the band
Press the [FM] / [AM] button.
2
Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote.
"– – – –" is displayed.
3
Enter the frequency
Press the number buttons on the remote.
Example:
Desired frequency
92.1 MHz (FM)
810 kHz (AM)
Canceling Direct Access Tuning
Press the [DIRECT] button on the remote.
• If you make no button operation for 10 seconds, the
Direct Access Tuning mode is automatically canceled.

Station Preset Memory

Putting the station in the memory.
1
Select the band
Press the [FM] / [AM] button.
2
Select the frequency to put in the memory
Turn the [4] / [¢] knob.
3
Put the frequency in the memory
Press the desired [1] — [6] button for at least
2 seconds.
The preset number display blinks 1 time.
On each band, 1 station can be put in the
memory on each [1] — [6] button.
16
|
English
Press button
[0], [9], [2], [1]
[0], [8], [1], [0]

Auto Memory Entry

Putting stations with good reception in the
memory automatically.
1
Select the band for Auto Memory Entry
Press the [FM] / [AM] button.
2
Open Auto Memory Entry
Press the [AME] button for at least 2 seconds.
When 6 stations that can be received are put in
the memory Auto Memory Entry closes.

Preset Tuning

Calling up the stations in the memory.
1
Select the band
Press the [FM] / [AM] button.
2
Call up the station
Press the desired [1] — [6] button.