Roland AE-30 Manual page 9

Jun. 2021
1. VERSION
This verifies the program version.
fig.test1.eps
T-S VERSION
01/14
1/5
App: *.**(****)
Press or to switch the CPU Program, Snd or WAVE ROM 0/
ROM 1/ROM 2 versions. Verify the version informations.
Press to advance to the next test item.
2. DEVICE
This checks the operation of the Program ROM.
fig.test2.eps
T-S DEVICE
02/14
1/7
Ready to Test
1.
Press .
Program ROM check begins automatically. If no error occurs, Test
Finish is displayed. If an error occurs, NG is displayed for the
corresponding item and execution does not advance to the next test item.
2.
Press to advance to the next test item.
3. WAVE ROM
This checks the operation of the Wave ROM.
fig.test3.eps
T-S WAVE ROM
03/14
1/3
Ready to Test
1.
Press .
WAV ROM check begins automatically. If no error occurs, Test Finish is
displayed. If an error occurs, NG is displayed for the corresponding item
and execution does not advance to the next test item.
2.
Press to advance to the next test item.
4. LCD
This checks the screen display.
fig.test4.eps
The screen is displayed with all dots white.
1.
Each time is pressed, verify that the display of the screen changes as
follows.
All Black -> Checkered Pattern -> Checkered Pattern (revise) -> contrast
(minimum) -> contrast (intermediate) -> contrast (maximum)
2.
Press to advance to the next test item.
5. LED
This checks whether each LED lights up correctly.
fig.test5.eps
T-S LED
05/14
1/3
ON Power LED
The power LED lights up orange and the
1.
Press .
The power LED goes dark and the
2.
Press .
The LED goes dark.
3.
Press to advance to the next test item.
6. SW
This checks the operation of the switches.
fig.test6.eps
T-S SW
06/14
1/36
To On KEY_X
1.
Press the buttons displayed on the screen in sequence.
fig.test6-2.eps
X
C
2
1
C
1
P
C
4
2
C
3
3
T
c
G
#
C
#
T
a
B
4
B
C5 C5
5
T
f
6
PH SENS PH SENS
E
d
C
When all buttons have been pressed, To Off PWR is displayed on the
screen.
2.
Switch the switch in sequence of ON -> OFF, OFF -> ON.
To On MIDI CONTROL is displayed on the screen.
3.
Switch the MIDI CONTROL switch in sequence of ON -> OFF, OFF ->
ON.
To On PH SENES is displayed on the screen.
4.
Connect the audio cable to the PHONES jack and disconnect it.
When the audio cable is disconnected, execution automatically advances
to the next test item.
AE-30
LED goes off.
LED lights up blue.
S1 S1
OCT OCT
S2 S2
OCT OCT
OCT OCT
OCT OCT
LEFT LEFT
RIGHT RIGHT
INC INC
MENU MENU
DEC DEC
MIDI MIDI
CONTROL CONTROL
PWR PWR
+2 +2
+1 +1
-1 -1
-2 -2
9