Table of Contents
Advertisement
Jun. 2021
10. Press
.
The following screen is displayed. Verify that no sounds are coming out
from the L/R sides of the headphones.
fig.test8-sc9.eps
T-S
AUDIO
08/14
9/17
Phone Mute Audio
11. Press
.
The following screen is displayed. Verify that no sounds are coming out
from the L/R sides of the headphones.
fig.test8-sc10.eps
T-S
AUDIO
08/14
10/17
Phone Mute Amp
12. Press
.
The following screen is displayed. Verify that no sounds are coming out
from the L/R sides of the headphones.
fig.test8-sc11.eps
T-S
AUDIO
08/14
11/17
Phone Reset DAC
13. Press
.
The following screen is displayed. Verify that sounds are coming out
from the L/R sides of the headphones.
fig.test8-sc12.eps
T-S
AUDIO
08/14
12/17
Phone Out L/R
14. Detach the headphones from the PHONES jack and connect it to the
OUTPUT jack.
15. Press
.
The following screen is displayed. Verify that sounds are coming out
from the L side of the headphones, not from the R side.
16. Press
.
The following screen is displayed. Verify that sounds are coming out
from the R side of the headphones, not from the L side.
fig.test8-sc14.eps
T-S
AUDIO
08/14
14/17
Line Out R
17. Press
.
The following screen is displayed. Verify that no sounds are coming out
from the L/R sides of the headphones.
fig.test8-sc15.eps
T-S
AUDIO
08/14
15/17
Line Mute Audio
18. Press
.
The following screen is displayed. Verify that no sounds are coming out
from the L/R sides of the headphones.
fig.test8-sc16.eps
T-S
AUDIO
08/14
16/17
Line Reset DAC
19. Press
.
The following screen is displayed. Verify that sounds are coming out
from the L/R sides of the headphones.
fig.test8-sc17.eps
T-S
AUDIO
08/14
17/17
Line Out L/R
20. Detach the headphones.
21. Press
to advance to the next test item.
12
9. BLUETOOTH
This verifies the Bluetooth function.
* When the unit enters this test item, pop noise is heard from the on-board
speakers.
* For explanation in this section, we will choose iPhone as an example of the
mobile device with Bluetooth function.
fig.test9.eps
T-S
BLUETOOTH
09/14
4/5
BT ID: **
BLE : --
A2DP: --
1.
Place an iPhone near the AE-30.
2.
On the iPhone, enter Settings and set Bluetooth on.
3.
On the Bluetooth setting screen, touch AE-30 Audio **.
When pairing succeeds, Connected is displayed on the right of AE-30
Audio ** and the screen display of AE-30 is changed from A2DP:-- to
A2DP:OK.
4.
Start Web MIDI on the iPhone.
5.
Go to the bottom right of the Web MIDI screen and touch
Setup Bluetooth MIDI Central.
6.
On the Bluetooth MIDI Devices screen, touch AE-30 **.
7.
When you are requested to pair, touch Pair.
When pairing succeeds, Connected is displayed on the right of AE-30 **
and the screen display of AE-30 is changed from BLE:-- to BLE:OK.
8.
Press
.
fig.test9-2.eps
T-S
BLUETOOTH
09/14
5/5
Check BT Audio
9.
Play back any music on the iPhone and verify that sound is produced
from the on-board speaker of the AE-30.
10. Press
to advance to the next test item.
10. MIDI
This checks the operation of MIDI IN/OUT.
fig.test10.eps
T-S
MIDI
10/14
1/1
Midi Loop Test
1.
Using the MIDI cable, connect the MIDI IN connector to the MIDI OUT
connector.
2.
Disconnect the MIDI cable.
Execution automatically advances to the next test item.
11. USB FUNC
This checks the operation of the USB connector (COMPUTER).
fig.test11.eps
T-S
USB FUNC
11/14
1/1
Midi Out [A0 51 00]
Midi Out [A0 51 00] is displayed on the screen.
1.
Using the USB cable, connect the USB connector to the computer.
2.
Start MIDI-OX on the computer.
3.
Click Options -> MIDI Devices....
The MIDI Devices window appears.
4.
Set MIDI Inputs to AE-30 and click OK.
5.
Verify that A0 51 00 is displayed at the Input window on the MIDI-OX
and the computer receives the MIDI messages.
6.
Disconnect the USB cable.
7.
Press
to advance to the next test item.
AE-30
, then touch
Advertisement
Table of Contents
