Gps Dc Test Points - Nokia 6255 Rf Description And Troubleshooting

Hide thumbs Also See for 6255:
Table of Contents

Advertisement

6255/6255i/6256/6256i (RM-19)
RF Description and Troubleshooting
2. Click Execute.
Figure 56: Turning on the GPS receiver on the GPS Control dialog box
3. Inject a -50dBm tone at 1575.52MHz at the GPS connector (X6250) with a signal
generator or a call box. (See Figure 54.)

GPS DC Test Points

Measure the following test points with an AAS-10B probe and spectrum analyzer set at
center frequency 1575.25MHz (span = 500kHz), or with a voltmeter as required.
Page 66
©2005 Nokia Corporation
Nokia Customer Care
Company Confidential
Issue 2 05/2005

Advertisement

Table of Contents
loading

This manual is also suitable for:

6255i6256i6256

Table of Contents