Nokia RM-645 Service Manual page 23

RM-645
General Information
Environmental condition
No operation or storage
Charging allowed
Long term storage conditions
Humidity
Relative humidity range is 5...95%.
The HW module is not protected against water. Condensed or splashed water might cause malfunction. Any
submersion of the phone will cause permanent damage. Long-term high humidity, with condensation, will
cause permanent damage because of corrosion.
Vibration
The module should withstand the following vibrations:
• 5 - 10 Hz; +10dB / octave
• 10 - 50 Hz; 5.58 m
2
• 50 - 300 Hz; - 10 dB / octave
ESD strength
Conducted discharge is 8 kV (>10 discharges) and air contact 15 kV ( >10 discharges ).
The standard for electrostatic discharge is IEC 61000-4-2, and this device fulfils level 4 requirements.
RoHS
This device uses RoHS compliant components and lead-free soldering process.
Issue 1
Ambient temperature
o
<-40 C...>+85
o
-25 C...+50
o
0 C...+85
3 2
/ s (0.0558 g / Hz)
COMPANY CONFIDENTIAL
Copyright © 2010 Nokia. All rights reserved.
o
C
o
C
o
C
Notes
No storage or operation: an
attempt may damage the phone.
Page 1 – 11