Self test troubleshooting
Phoenix self test troubleshooting
Context
Always start the troubleshooting procedure by running the Phoenix self tests. If a test fails, please follow the
diagram below.
If the phone is dead and you cannot perform the self tests, go to
chapter 3, BB Troubleshooting and Manual Tuning Guide.
Note:
Self tests are recommended to be made when phone is in jig and a 50Ω load connected to
the RF connector. Otherwise power tests may fail depending on antenna load
Page 4 – 8
COMPANY CONFIDENTIAL
Copyright © 2010 Nokia. All rights reserved.
Dead or jammed device troubleshooting in
RM-645
RF Troubleshooting
Issue 1