Table of Contents
Advertisement
Palm-rest and keyboard assembly
Removing the palm-rest and keyboard assembly
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the
wireless
card.
5. Remove the
left
fan.
6. Remove the
right
fan.
7. Remove the speakers.
8. Remove the
coin-cell
9. Remove the touchpad.
10. Remove the
display
assembly.
11. Remove the
I/O
board.
12. Remove the
power button with fingerprint
13. Remove the
M.2 2230 solid-state drive
14. Remove the
system
board.
NOTE:
The system board can be removed with the heat sink and solid-state drives attached.
NOTE:
Ensure that your computer is in Service Mode. For more information see, step 6 in
computer.
About this task
The following image(s) indicate the location of the palm-rest and keyboard assembly and provides a visual representation of the
removal procedure.
54
Removing and installing components
Before working inside your
battery.
reader.
or
M.2 2280 solid-state
computer.
drive, as applicable.
Before working inside your
Advertisement
Table of Contents
