IBM x3100 M3 4253 Installation And User Manual page 61

System x3100 m3 server

Hide thumbs Also See for x3100 M3 4253:

Table of Contents

Simple-swap

backplate

9. Rotate the backplate toward the drive cage and over the locating pins; then,

press the backplate onto the drive cage until the release latch securely

engages the backplate.

10. Connect the cables. Do one of the following:

v Connect the signal cable to the connector on the ServeRAID adapter

v Connect the other end of the SATA signal cables and power cable to the

connectors on the system board (see )

11. Route the signal cables so that it does not block the airflow to the rear of the

drives or over the microprocessor and dual inline memory modules (DIMMs).

Drive cage

Tabs

Locating pins

Chapter 2. Installing optional devices

Table of Contents