12.9.2. DISASSEMBLING THE DISPENSING UNIT
A
2
B
C
36
1
3
Technical support maintenance manual
Figure A: remove the cranks (1)
and the rods (2) by extracting the
Seeger rings on each side (two
external and one internal).
E
Figure B: remove the infusion
chamber.
Unscrew the three fixing screws
of the CAPSULE TOP PIERCING
SUPPORT (3) in order to extract
it.
C
Figure C: remove the four bolts of
the DISPENSING UNIT, slightly tilt
the component and remove it.
D
Rel. 0.00 / February 2020