LAVAZZA blue LB 400 CLASSY PLUS Maintenance Manual page 24

B
2
Note
Hydraulic pipe passages must not be altered. Any clamps must be removed during disassembly and restored
during reassembly operations.
C
3
D
When reassembling, set the pipe of the new clamps in place and tighten them
using OETIKER pliers.
20
1
Technical support maintenance manual
Figure B: disconnect this type of
hydraulic pipe by removing the
clip (1) using long nose pliers and
disconnecting the pipe (2) by pul-
ling it outwards.
F
Note
Recover the gaskets
and insert them
pipes as shown in figure C.
Replace the gaskets if worn.
Figure D: remove the high pres-
sure pipe by cutting the clamps
with CLIPPERS.
H
N
Rel. 0.00 / February 2020
(3)
in the