Table of Contents
Advertisement
Installing the Indoor Unit
Hazardous Service Procedures!
The maintenance and troubleshooting procedures recommended in this section of the
manual could result in exposure to electrical, mechanical or other potential safety
hazards. Always refer to the safety warnings provided throughout this manual
concerning these procedures. When possible, disconnect all electrical power including
remote disconnect and discharge all energy storing devices such as capacitors before
servicing. Follow proper lockout/tagout procedures to ensure the power can not be
inadvertently energized. When necessary to work with live electrical components, have
a qualified licensed electrician or other individual who has been trained in handling live
electrical components perform these tasks. Failure to follow all of the recommended
safety warnings provided, could result in death or serious injury.
Mounting Location
1. Confirm the mounting location with the customer. Keep in mind the guidelines for a
safe installation location on page 8.
2. Ensure the hanging point is strong enough to support 4 times the weight of the unit.
3. The weight of the unit should be shared equally by the expansion bolts.
4. Insert the M10 (or larger) expansion bolts into the hole and knock the nail into the
bolt Refer to the outline dimension drawings for the distance between holes.
5. Insert the hanger on the indoor unit as shown below.
6. Install the indoor unit on the ceiling support bolts.
WARNING
Anchor
48mm
2 inch
9
Ceiling Concealed Unit
Hanger bolt
Air conditioning unit
Advertisement
Table of Contents
