Test The Drainage System - Trane American Standard 4MXD8509A10N0 Installer Manual

Air handler for multi-split inverter system
Table of Contents

Advertisement

Ceiling Concealed Unit
NOTES:
1. The connection height of the drain hose should be within 33.5 inches (850mm) so that the
outlet of the drain hose does not suffer from external force.
2. If multiple drain pipes converge, please follow the installation diagrams below.
The specification of the joint of the drain pipe should be suitable to the running capacity of the unit

Test the Drainage System

1. After the electrical installation, test the drainage system.
2. During the test, check to ensure the water flow goes through the pipe correctly and observe
the joint carefully to see if it leaks. If this unit is installed in a newly built house, it is suggested
to perform this test prior to the ceiling installation.
I
- Joint of drain pipe
Drain Hose (accessory)
16

Advertisement

Table of Contents
loading

Table of Contents