Roland SPD-SX Owner's Manual page 37

4.
To start sampling, play the first pad to which you want to sample.
To begin sampling from partway through a wave, press the [F2] (START) button to start playback of the wave, then play a pad
at the point where you want sampling to occur.
Unassigned pad
Pad for which sampling is complete
5.
At the moment you want to chop the sample, play the next pad to which you want to sample.
Sampling to the first pad will stop, and sampling to the pad you struck will begin.
MEMO
Sampling to that pad will stop when you press the [ENTER] button or when you once again play the pad that's being
sampled.
You can continue sampling by playing a pad that doesn't have anything assigned to it yet.
6.
To finish with all sampling, play one of the pads for which sampling has already been completed.
Sampling will finish, and the sampling-results screen will appear.
MEMO
If you play a pad that already has a sample assigned to it, the wave assigned to that pad will play.
Saving the sampled waves
7.
Save the sampled waves (p. 31).
Pad is being sampled
Sampling
37