Sampling To A Single Pad (Basic Sampling) - Roland SPD-SX Owner's Manual

Sampling to a Single Pad (BASIC SAMPLING)

Here's how to sample sound from a microphone or audio device to just a single pad.
Preparations for sampling
1.
Connect your sampling source (microphone or audio device) (p. 12).
Sampling from your computer
* The USB driver must be installed in your computer (p. 19).
1.
Set the MENU SETUP
2.
Use a commercially available USB cable to connect the SPD-SX's COMPUTER connector to your
computer (p. 19).
2.
Set the input level appropriately for the device that's connected.
Digital audio player, etc.
Microphone
Computer
3.
Press the [SAMPLING] button to access the SAMPLING screen.
4.
Use the cursor [ ] [
The sampling setup screen will appear.
OPTION USB MODE parameter to "AUDIO/MIDI."
Set the input level by adjusting the volume of the playback
software on your computer.
MEMO
In order to sample at the best audio quality, we recom-
mend that you set the volume of your playback software
as high as possible.
] buttons to select "BASIC," and press the [ENTER] button.
Set the [GAIN] knob on the rear panel to
the LINE position.
Set the [GAIN] knob on the rear panel
to the MIC position.
Sampling
29