Resampling With Effects (With Fx) - Roland SPD-SX Owner's Manual

Resampling with Effects (WITH FX)

Here's how to apply a kit effect and a master effect to a sample and resample the result.
Preparations for sampling
1.
Press the [SAMPLING] button to access the SAMPLING screen.
2.
Use the cursor [ ] [
The sampling setup screen will appear.
3.
Use the cursor buttons and the [-] [+] buttons to make settings for sampling.
Parameter Value
SOURCE KIT001–100, PAD1–9
KIT001–100, PAD1–9
REC LEVEL 0–100
4.
Turn on the master effect that you want to apply (p. 22).
Start sampling
5.
Press the [F2] (START) button to start sampling.
When sampling ends, the sampling result screen will appear.
Saving the sampled waves
6.
Save the sampled waves (p. 31).
] buttons to select "WITH FX," and press the [ENTER] button.
Explanation
From the kit, select the wave to which you want to apply effects.
When sampling starts, the kit effect for the kit that is selected for SOURCE will be applied.
Select the kit and pad to which the wave you've applied effects to is to be assigned.
* You can only select an empty pad, one which has no wave assigned to it.
Adjust the sampling volume.
Play back the wave that you want to resample, and adjust the volume until it's as high as you
can get it without causing the level overload indication to appear.
You can audition the currently selected wave by pressing the [F1] (PREVIEW) button.
Level meter
Sampling
Level overload indication
35