Extension Cords -115Volt; Extension Cords -230Volt - Castex QJY-S3 Manual

Scissor Lift
FIGURE A
1.6.3

Extension cords -115volt

 115 volt Double Insulated power equipment can use either a two or t h r e e
wire 115 volt extension cord.
 As the distance from the supply outlet increases, you must use a h e a v i e r
gauge extension cord. Using extension cords with inadequately sized wire
causes a serious drop in voltage, resulting in loss of power and possible tool
damage.(See Figure B, next page.)
 The smaller the gauge numbers of the wire, the greater the capacity of t h e
cord. For example, a 14 gauge cord can carry a higher current than a
16gauge cord.(See Figure B.)
 When using more than one extension cord to make up the total length, m a k e
sure each cord contains at least the minimum wire size required.(See figure
B)
 If you are using one extension cord for more than one tool, add t h e
nameplate amperes and use the sum to determine the required minimum cord
size. (See Figure B.)
 If you are using an extension cord outdoors, make sure it is marked with
t h e suffix "W-A" ("W" in Canada) to indicate it is acceptable for outdoor use.
 Make sure your extension cord is properly wired and in good electrical
condition. Always replace a damaged extension cord or have it repaired by a
qualified electrician before using it.
 Protect your extension cords from sharp objects, excessive heat, and damp
o r wet areas.
6
QJY-S3