Servie; Electrical; Electrical Safety - Castex QJY-S3 Manual

Scissor Lift
and must be repaired or replaced.
 Disconnect the Power Cord Plug from the power source before making a n y
adjustments, changing accessories, or storing the power equipment. Such
preventive safety measures reduce the risk of starting the equipment
accidentally.
 Store idle equipment out of reach of children and other untrained persons.
Power equipment is dangerous in the hands of untrained users.
 Maintain power equipment with care. Properly maintained equipment isl e s s
likely to fail and is easier to control. Do not use damaged power equipment.
Tag damaged power equipment "Do not use" until repaired.
 Check for misalignment or binding of moving parts, breakage of parts, a n d
any other condition that may affect the power equipment's operation. If
damaged, have the equipment serviced before using. Many accidents are
caused by poorly maintained power equipment.
 Use only accessories that are recommended by the manufacturer for y o u r
model. Accessories that may be suitable for one power equipment may
become hazardous when used on other power equipment.
1.5 Service
 Tool service must be performed only by qualified repair personnel. S e r v i c e
or maintenance performed by unqualified personnel could result in a risk of
injury.

When servicing a tool, use only identical replacement parts.
F o l l o w instructions in the "Inspection, Maintenance, and cleaning" section of
this manual. Use of unauthorized parts or failure to follow maintenance
instructions may create a risk of electric shock or injury.

1.6 Electrical

1.61 Electrical

Grounded tools must be plugged into an outlet properly installed a n d
grounded in accordance with all codes and ordinances. Never remove the
grounding prong or modify the plug in any way. Do not use any adapter
plugs. Check with a qualified electrician if you are in doubts as to whether
the outlet is properly grounded. If the tools should electrically malfunction or
break down, grounding provides a low resistance path to carry electricity
away from the user.
 Double insulated tools are equipped with a polarized plug (one blade is w i d e r
than the other). This plug will fit in a polarized outlet only one way. If the
plug does not fit fully in the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician to install a polarized outlet. Do not change the
plug in any way. Double insulation eliminates the need for the three wire
grounded power cord and grounded power supply system.
 Avoid body contact with grounded surfaces such as pipes, radiators, r a n g e s ,
and refrigerators. There is an increased risk of electric shock if your body is
grounded.
safety
4
QJY-S3