Error Displays - Clarion XDZ616w Owner's Manual

10. ERROR DISPLAYS

If an error occurs, one of the following displays is displayed.
Take the measures described below to eliminate the problem.
Error Display
ERROR 2 A CD is caught inside the CD deck and is
not ejected.
ERROR 3 A CD cannot be played due to scratches,
etc.
ERROR 6 A CD is loaded upside-down inside the CD
deck and does not play.
ERROR 2 A CD inside the CD changer is not loaded.
ERROR 3 A CD inside the CD changer cannot be
played due to scratches, etc.
ERROR 6 A CD inside the CD changer cannot be
played because it is loaded upside-down.
ERROR H Displayed when the temperature in the MD
changer is too high and playback has
been stopped automatically.
ERROR 2 An MD inside the MD changer is not loaded.
ERROR 3 An MD inside the MD changer cannot be
played due to scratches, etc.
ERROR 6 An MD inside the MD changer cannot be
played because it is loaded upside-down.
Displayed when a non-recorded MD is
loaded in the MD changer.
If an error display other than the ones described above appears, press the reset button. If the problem
persists, turn off the power and consult your store of purchase.
Cause
Measure
This is a failure of CD deck's mechanism
and consult your store of purchase.
Replace with a non-scratched,
non-warped disc.
Eject the disc then reload it properly.
This is a failure of CD changer's mecha-
nism and consult your store of purchase.
Replace with a non-scratched, non-warped
disc.
Eject the disc then reload it properly.
Lower the surrounding temperature and
wait for a while to cool off MD changer.
This is a failure of MD changer's mecha-
nism and consult your store of purchase.
Replace with a non-scratched, non-warped
disc.
Eject the disc then reload it properly.
Load a pre-recorded MD in the MD
changer.
31
XDZ616